Fishing Weight Molds with 5 Cavities and 2 Fixing Clips

Usage Warnings:

1. Lead is a toxic material. Caution must be exercised when handling it.
2. Ensure you wear protective clothing when working with molds and exercise care when heating and pouring lead.
3. Use dry molds, as water can cause the molten lead to explode, making it impossible to handle properly.

When disposing of unwanted lead, please consult your local authority about the appropriate methods.

Steps for use before pouring:

It is recommended to preheat the mold before use. Place the scrap lead into a saucepan and heat it until it becomes molten (lead typically melts at 650 degrees Fahrenheit). Once the lead has melted, use a cooking spoon to remove any impurities that have risen to the top. If you are making a sinker that requires a hole in the center, place the hanger wire into the mold. Use the matching pliers to carefully grasp the sides of the mold with the pouring cavity facing you.

Pouring step:

After completing the above steps, pour the molten lead into the mold until the cavity is filled. Wait 10 seconds, then use pliers to pull out the wire and proceed to open the mold. Use pliers to cut off the excess lead on the top of the sinker, and the production is complete.

Types of fishing sinkers:

This fishing mold can be used to create fish sinkers of different weights, such as 1, 2, and 3-ounce versions. The produced fishing sinkers are designed in a unique shape that reduces water resistance and the possibility of entanglement with stones or rocks. The top threading holes hold the fishing line firmly in place.

Batch production:

This fishing mold can easily produce a large number of fish pendants with multiple weights. The fishing weights can be easily matched with fish hooks and fishing lines, making it suitable for fishing enthusiasts to create their own fishing equipment. This is ideal for outdoor fishing activities.

product information: